Hoover IRONSPEED SRD 4107 User Manual page 7

48001378-1 - Ironspeeed_SR_final.pdf 05/01/2010 09:19:31
If
ed
cial
er
M
o the
Y
t is not
MY
vised in its
ce.
K
e of
e
ooled
5 - GB
Ironspeeed_SR__1-15_union_pprod3.indd 5
ter 1.1 - ontrol Panel
appliance is switched on (Only models with domestic iron).
Recommended for dry ironing session.
(only with professional iron).
that iron switch (1G) needs to be switched on for heating up the boiler (only with
professional iron).
steam is ready. You can press the steam trigger and steam will escape from the
soleplate. Please note that during use, the light goes on from time to time but you
the tank following the instructions of chapter 2.2
"Rinse indicator" ligh
of scale. Please refer to chapter 4.2 for further instructions. (only models: SRD 4106,
SRD 4108, SRD 4110, SRP 4105)
switch (1A). You will need to wait a little bit steam is ready before restarting ironing.
Please refer to the steam ready led paragraph for more detail. (only models: SRD
4108, SRD 4110)
ter 1.2 - Lock System
In order to facilitate the carrying and the storage of your ironing system, your
appliance is designed with a lock system (2). This system blocks the iron on the
upper tray. It's therefore very easy to move and store the appliance. Please follow
the underneath indications in order to lock correctly your iron on the resting
mat (3).
You should rinse the boiler in order to avoid deposit
5
11-12-2009 9:59:55