Hoover IRONSPEED SRD 4107 User Manual page 10

Hide thumbs Also See for IRONSPEED SRD 4107:
Table of Contents

Advertisement

Available languages

Available languages

48001378-1 - Ironspeeed_SR_final.pdf 24/12/2009 11:23:06
C
M
Y
CM
MY
CY
CMY
K
8 -
GB
Ironspeeed_SR__1-15_union_pprod3.indd 8
Warning: Do not put any vinegar, hot water, perfume, or any other kind of chemical
agents or any other contents in the water tank. It could damage the steam
generator and shorten its life use.
Chapter 2.3 - Switching on the Appliance
Domestic Iron Models:
Connect the appliance with the mains cord to the earthed socket. Press on the on/
appliance is running on and that the boiler is heating up.
you can start using steam.
Professional Iron Models:
Connect the appliance with the main cord to the earthed socket. Press the iron on/
turned up and inform you that the appliance is running on. The iron soleplate and
the boiler are heating up.
N.B.
normal and will disappear quickly.
Chapter 3: Using Your Steam Generator
Chapter 3.1 - Regulating the Soleplate Temperature
Select the temperature of the soleplate by turning the dial (12) on the iron to the
will indicate you that the soleplate has reached the requested temperature.
adjusts without interrupting ironing.
Help:
To know the best suitable temperature for each textile, check the laundry care label of
the article to be ironed. Please note that during use, the temperature light goes on from
adequacy with the most delicate one.
If you select a lower temperature while ironing, wait until the iron has cooled down to
the set temperature before you continue ironing.
If the temperature is too low, some drops of water could escape from the soleplate.
Please raise up the temperature abov
to avoid this issue
11-12-2009 9:59:56
9

Advertisement

Table of Contents
loading

Table of Contents