Cooking By Time - GE JE1468K Use & Care Manual

Countertop microwave oven
Table of Contents

Advertisement

Cooking by Time

Time Cook 1 & 11 allows you to
microwave for a selected amount
of time.
(High) is
but you may change this for more
flexibility. See your cookbook.
time cooking, make a cup of coffee
by following the steps below.
I
II
II
Step 1: Fill a cup 2/3 full of water,
has no metal decoration and is
microwave-sate (refer to
Microwaving Tips in the Safety
Instructions). Place cup in oven
Step 2: Touch TIME COOK I & Il.
Step 3: Select your time. Touch 1
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see "How to
Step 4: Touch START.
Step
5: When time is up, the oven
signals and flashes "End." Oven,
Step 6: Open the door.
10
Using the Time Cook II
Feature
The Time Cook 11 feature lets you
set two time cooking functions
within one program. This is ideal
Here's how to do it.
Step 1: Place food in oven in
microwave-safe container and
close the door.
1
Step 2: Touch TIME COOK 1 & 11.
Display shows ": 0" and
"POWER 10. " "ENTER COOK
TIME I" flashes.
Step 3: Select your cooking time.
two minutes and 15 seconds.
Display shows "2: 15" and
"POWER lo.'" "COOK TIME 1"
flashes.
Step 4: Touch TIME COOK I & 11.
Step 5: Set your cookin& time.
How to Change Power Level
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step 6: Touch START.
Step 7: "POWER 10'" is displayed
and "COOK TIME I" counts down.
Step 8: At the end of "COOK
TIME I," the second power level
is displayed and "COOK TIME II"
is shown counting down.
Step 9: When time is up, the oven
oven, light and fan shut off.
Step 10: Open the door.
The Express Cook Feature
The Express Cook feature is a
short-cut method to set time for
I–5 minutes.
To Expr-ess Cook your food or
beverage:
Step 1: Touch a number pad (from
amount of your desired cooking
time (in minutes). For example,
Step 2: Touch the START pad.
The oven will automatically signal,
flash "End" and shut off at the end
Add 30 Seconds

Advertisement

Table of Contents
loading

Table of Contents