Brake lever
The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.
1
2
(a)
4
3
(b)
1. Rubber cover
2. Brake lever
3. Locknut
4. Adjusting bolt
5. Distance between brake lever and handlebar
grip
The brake lever is equipped with a po-
sition adjusting bolt. Adjust the distance
between the brake lever and the han-
dlebar grip as follows.
1. Slide the rubber cover toward the
end of the brake lever.
2. Loosen the locknut.
INSTRUMENT AND CONTROL FUNCTIONS
EAU41262
3. While holding the lever pushed
away from the handlebar grip, turn
the adjusting bolt in direction (a) to
increase the distance, and in direc-
tion (b) to decrease it.
Distance between the brake lever
and the handlebar grip:
Minimum (shortest):
76 mm (2.99 in)
5
Standard:
95 mm (3.74 in)
Maximum (longest):
97 mm (3.82 in)
4. Tighten the locknut.
5. Slide the rubber cover to its origi-
nal position.
Brake pedal
1. Brake pedal
The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.
4-2
EAU12941
4