Brake Lever - Yamaha PW50 2008 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
2
(a)
3
1. Locknut
2. Adjusting screw
4
3. Tighten the locknut.
5
6
7
1
8
9
1. No more than 7 mm (0.28 in)
TIP
The adjusting range of the speed limiter
screw is from the fully turned-in position
to 7 mm (0.28 in) turned out. When the
screw is turned out to 7 mm (0.28 in),
1
the throttle grip can only be opened ap-
2
proximately halfway. If more power is
required, please consult a Yamaha
dealer.
(b)
WARNING
Improper adjustment of the speed
limiter could cause improper throttle
operation. You could lose control,
have an accident or be injured. Do
not turn the adjusting screw out
more than 7 mm (0.28 in) before con-
sulting a Yamaha dealer. Always
make sure the throttle cable free
play is adjusted to 1.5–3.5 mm
(0.06–0.14 in). (See page 6-11.)
Power reduction plate
Once the rider can operate with skill at
the top speed permitted by adjusting
the speed limiter alone, the power re-
duction plate can be removed. (See
page 6-6.)

Brake lever

EWA14630
1. Front brake lever
The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.
3-2
EAU12890
1