Remote Administration - LevelOne WBR-3600 User Manual

11g wireless adsl2+ router
Hide thumbs Also See for WBR-3600:
Table of Contents

Advertisement

Remote Administration

If enabled, this feature allows you to manage the WBR-3600 ADSL2+ Router via the
Internet.
Data - Remote Administration Screen
Remote Administration
Enable Remote
Management
Current
IP Address
Port Number
Access Permission
Allow Remote
Access
Figure 61: Remote Administration Screen
Check to allow administration/management via the Internet.
(To connect, see below).
If Disabled, this device will ignore Administration connection
attempts from the Internet.
This is the current address you will use when accessing this
device from the Internet. To connect, see details and an
example below.
Enter a port number between 1 and 65535. The default for
HTTP (Web) connections is port 80, but using port 80 will
prevent the use of a Web "Virtual Server" on your LAN. So
using a different port number is recommended. The default
value is 8080.
The port number must be specified in your Browser when you
connect. See the following section for details.
Select the desired option.
Everyone - allow access by everyone on the Internet.
Only This Computer - allow access by only one IP
address. Enter the desired IP address.
IP Address Range - allow access from a range of IP
addresses on the Internet. Enter a beginning and ending
82

Advertisement

Table of Contents
loading

Table of Contents