Configuring Acls; Overview; Applications On The Switch; Acl Categories - HP 6125XLG Configuration Manual

Configuring ACLs

Overview

An access control list (ACL) is a set of rules (or permit or deny statements) for identifying traffic based on
criteria such as source IP address, destination IP address, and port number.
ACLs are primarily used for packet filtering.
example. You can use ACLs in QoS, security, routing, and other feature modules for identifying traffic.
The packet drop or forwarding decisions varies with the modules that use ACLs.

Applications on the switch

An ACL is implemented in hardware or software, depending on the module that uses it. If the module is
implemented in hardware (for example, the packet filter or QoS module), the ACL is applied to hardware
to process traffic. If the module is implemented in software (for example, the routing module or the user
interface access control module such as Telnet or SNMP), the ACL is applied to software to process
traffic.
The user interface access control module denies packets that do not match any ACL. Some modules (QoS
for example) ignore the permit or deny action in ACL rules and do not base their drop or forwarding
decisions on the action set in ACL rules. See the specified module for information about ACL application.

ACL categories

Category
Basic ACLs
Advanced ACLs
Ethernet frame
header ACLs

Numbering and naming ACLs

Each ACL category has a unique range of ACL numbers. When creating an ACL, you must assign it a
number. In addition, you can assign the ACL a name for ease of identification. After creating an ACL with
a name, you cannot rename it or delete its name.
ACL number IP version
IPv4
2000 to 2999
IPv6
IPv4
3000 to 3999
IPv6
4000 to 4999 N/A
"Configuring packet filtering with
Match criteria
Source IPv4 address.
Source IPv6 address.
Source IPv4 address, destination IPv4 address,
packet priority, protocols over IPv4, and other
Layer 3 and Layer 4 header fields.
Source IPv6 address, destination IPv6 address,
packet priority, protocols over IPv6, and other
Layer 3 and Layer 4 header fields.
Layer 2 header fields, such as source and
destination MAC addresses, 802.1p priority,
and link layer protocol type.
1
ACLs" provides an