Setting The Fixed-Area Ratio For A Queue; Applying Data Buffer Configuration - HP 6125XLG Configuration Manual

Value of ratio-value
8 to 16
17 to 29
30 to 42
43 to 60
61 to 76
77 to 86
89 to 100

Setting the fixed-area ratio for a queue

By default, all queues have an equal share of the fixed area. This task allows you to change the fixed-area
ratio for a specific queue. The other queues equally share the remaining part.
The fixed-area space for a queue cannot be used by other queues. Therefore, it is also called the
minimum guaranteed buffer for the queue. The sum of ratios configured for queues cannot be greater
than or equal to 100%, and queues 5, 6, and 7 must have available fixed area space.
To set the fixed-area ratio for a specific queue:
Step
1. Enter system view.
2. Set the fixed-area ratio for a
specific queue.

Applying data buffer configuration

Perform this task to apply the data buffer configuration.
You cannot directly modify the applied configuration. To modify the configuration, you must cancel the
application, re-configure data buffers, and re-apply the configuration.
To apply data buffer configuration:
Step
1. Enter system view.
2. Apply data buffer configuration.
Effective value
11
20
33
50
67
80
89
Command
system-view
buffer egress [ slot slot-number ] cell queue
queue-id guaranteed ratio ratio
Command
system-view
buffer apply
83
Remarks
N/A
The default setting is 13%
for all queues.