HP 6125XLG Configuration Manual page 39

Blade switch acl and qos configuration guide

Hide thumbs Also See for 6125XLG:

Table of Contents

[Device] interface ten-gigabitethernet 1/1/7

[Device-Ten-GigabitEthernet1/1/7] qos apply policy admin inbound

# Configure a priority marking policy for the marketing department, and apply the policy to the

incoming traffic of Ten-GigabitEthernet 1/1/5.

[Device] traffic behavior market

[Device-behavior-market] remark dot1p 5

[Device-behavior-market] quit

[Device] qos policy market

[Device-qospolicy-market] classifier http behavior market

[Device-qospolicy-market] quit

[Device] interface ten-gigabitethernet 1/1/5

[Device-Ten-GigabitEthernet1/1/5] qos apply policy market inbound

# Configure a priority marking policy for the R&D department, and apply the policy to the

incoming traffic of Ten-GigabitEthernet 1/1/6.

[Device] traffic behavior rd

[Device-behavior-rd] remark dot1p 3

[Device-behavior-rd] quit

[Device] qos policy rd

[Device-qospolicy-rd] classifier http behavior rd

[Device-qospolicy-rd] quit

[Device] interface ten-gigabitethernet 1/1/6

[Device-Ten-GigabitEthernet1/1/6] qos apply policy rd inbound

Table of Contents