HP 6125XLG Configuration Manual page 18

# Add Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 1/1/6, and Ten-GigabitEthernet 1/1/7 to
VLAN 10.
[Switch] interface Ten-GigabitEthernet 1/1/5
[Switch-Ten-GigabitEthernet1/1/5] port access vlan 10
[Switch-Ten-GigabitEthernet1/1/5] quit
[Switch] interface Ten-GigabitEthernet 1/1/6
[Switch-Ten-GigabitEthernet1/1/6] port access vlan 10
[Switch-Ten-GigabitEthernet1/1/6] quit
[Switch] interface Ten-GigabitEthernet 1/1/7
[Switch-Ten-GigabitEthernet1/1/7] port access vlan 10
[Switch-Ten-GigabitEthernet1/1/7] quit
# Create VLAN-interface 10 and specify its IP address.
[Switch] interface vlan-interface 10
[Switch-vlan-interface10] ip address 192.168.1.2 24
[Switch-vlan-interface10] quit
# Configure a multiport unicast MAC address entry that has MAC address 00e0-fc01-0000, and output
interfaces Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 1/1/6, and Ten-GigabitEthernet 1/1/7 in
VLAN 10.
[Switch] mac-address multiport 00e0-fc01-0000 interface Ten-GigabitEthernet 1/1/5 to
Ten-GigabitEthernet 1/1/7 vlan 10
# Configure a multiport ARP entry with IP address 192.168.1.1 and MAC address 00e0-fc01-0000.
[Switch] arp multiport 192.168.1.1 00e0-fc01-0000 10
# Display ARP information.
[Switch] display arp
Type: S-Static
IP Address MAC Address
192.168.1.1 00e0-fc01-0000
D-Dynamic M-Multiport
VLAN Interface
10 N/A
9
I-Invalid
Aging Type
N/A M