Displaying And Maintaining The Dhcpv6 Server - HP 6125XLG Configuration Manual

Step
3. Enable the DHCPv6
server on the interface.
4. Configure an
address/prefix
assignment method.

Displaying and maintaining the DHCPv6 server

Execute display commands in any view and reset commands in user view.
Task
Display the DUID of the local device.
Display DHCPv6 address pool information.
Display prefix pool information.
Display DHCPv6 server information on an
interface.
Display information about IPv6 address
conflicts.
Display information about expired IPv6
addresses.
Display information about IPv6 address
bindings.
Display information about IPv6 prefix
bindings.
Display packet statistics on the DHCPv6
server.
Clear information about IPv6 address
conflicts.
Clear information about expired IPv6
address bindings.
Clear information about IPv6 address
bindings.
Clear information about IPv6 prefix
bindings.
Clear packets statistics on the DHCPv6
server.
Command
ipv6 dhcp select server
•
Configure global address assignment:
ipv6 dhcp server { allow-hint |
preference preference-value |
rapid-commit } *
•
Apply a DHCPv6 address pool to the
interface:
ipv6 dhcp server apply pool
pool-name [ allow-hint | preference
preference-value | rapid-commit ] *
Command
display ipv6 dhcp duid
display ipv6 dhcp pool [ pool-name ]
display ipv6 dhcp prefix-pool [ prefix-pool-number ]
display ipv6 dhcp server [ interface interface-type
interface-number ]
display ipv6 dhcp server conflict [ address ipv6-address ]
display ipv6 dhcp server expired [ address ipv6-address | pool
pool-name ]
display ipv6 dhcp server ip-in-use [ address ipv6-address | pool
pool-name ]
display ipv6 dhcp server pd-in-use [ pool pool-name | prefix
prefix/prefix-len ]
display ipv6 dhcp server statistics [ pool pool-name ]
reset ipv6 dhcp server conflict [ address ipv6-address ]
reset ipv6 dhcp server expired [ address ipv6-address | pool
pool-name ]
reset ipv6 dhcp server ip-in-use [ address ipv6-address | pool
pool-name ]
reset ipv6 dhcp server pd-in-use [ pool pool-name | prefix
prefix/prefix-len ]
reset ipv6 dhcp server statistics
152
Remarks
By default, the interface discards
DHCPv6 packets from DHCPv6
clients.
Use one of the commands.
By default, desired
address/prefix assignment and
rapid assignment are disabled,
and the default preference is 0.