HP 6125XLG Configuration Manual page 112

Blade switch layer 3 - ip services
Table of Contents

Advertisement

# Specify for DDNS update requests the URL address with the login ID steven and plaintext password
nevets.
[Switch-ddns-policy-oray.cn] url oray://phservice2.oray.net
[Switch-ddns-policy-oray.cn] username steven
[Switch-ddns-policy-oray.cn] password simple nevets
# Set the DDNS update request interval to 12 minutes.
[Switch-ddns-policy-oray.cn] interval 0 0 12
[Switch-ddns-policy-oray.cn] quit
# Specify the IP address of the DNS server as 1.1.1.1.
[Switch] dns server 1.1.1.1
# Apply the DDNS policy oray.cn to VLAN-interface 2 to enable DDNS update and to dynamically
update the mapping between whatever.gicp.cn and the primary IP address of VLAN-interface 2.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ddns apply policy oray.cn fqdn whatever.gicp.cn
After the preceding configuration is completed, Switch notifies the DNS server of its new domain
name-to-IP address mapping through the PeanutHull server, whenever the IP address of Switch changes.
Therefore, Switch can always provide Web service at whatever.gicp.cn.
104

Advertisement

Table of Contents
loading

Table of Contents