Cleaning
U3606B Service Guide
Clean the outside of the instrument with a soft, lint- free,
slightly dampened cloth. Disassembly is not required or
recommended for cleaning.
Dirt or moisture in the terminals can distort readings.
Cleaning procedures are as follows:
1 Turn the instrument off and remove the test leads.
2 If possible, turn the instrument over and shake out any
dirt that may have accumulated in the terminals.
3 Wipe the case with a damp cloth and mild detergent — do
not use abrasives or solvents. Wipe the contacts in each
terminal with a clean cotton swab moistened with alcohol.
Service and Maintenance
Cleaning
2
107