Table of Contents
Advertisement
22
20
21
23
24
A
A
B
B
SUB OUT
33
34
35
REAR PANEL
20. PHONO IN - (2 RCA Jacks) Connect to the left and right audio output from a turntable. Phono In is selected by pressing the
Phono button on either the M40 Front Panel or Remote Control. When selected, the Front Panel Display will indicate PHONO.
GND - If connecting a turntable, connect the ground wire from the turntable to reduce audio hum.
21. FM(75Ω) - (1 female 'F' type terminal) Connect to the included FM antenna.
22. GND/AM - (2 spring clips) Connect to the included AM Loop antenna.
23. CD IN - (2 RCA Jacks) Connect to the left and right line level audio outputs of a CD Player or other device such as a MP3 Player,
Music Server, etc. CD IN is selected by pressing the CD button on either the M40 Front Panel or Remote Control. When select-
ed, the Front Panel Display will indicate CD.
24. TAPE IN/OUT - (4 RCA Jacks) Connect to the left and right line level audio inputs and outputs of a tape deck or other audio
recording device for recording and playback of analog audio content. The Tape Out Jacks will output line level audio from the
currently selected source. Tape IN is selected by pressing the Tape Monitor button on the M40 Front Panel or the Tape M but-
ton on the Remote Control. The Front Panel Display will indicate the currently selected source and TAPE M will flash slowly to
indicate that Tape Monitor is active.
IN - Connect to the left and right line level audio outputs of a tape deck or other analog audio record/playback device.
This input can also be used as an auxiliary line level audio input if all other inputs are being used.
OUT - Connect to the left and right line level audio inputs on a tape deck or other analog audio recording device.
27
26
25
36
Diagram 2 M40 Rear Panel Features
M40 REAR PANEL FEATURES
30
28 29
31
37
38
9
32
39
Hide quick links:
Advertisement
Table of Contents
