M40 Remote Features - Proficient Audio Systems M40 User Manual

80w x 2 channel stereo receiver
Table of Contents

Advertisement

M40 REMOTE FEATURES

M40 REMOTE FEATURES
40. LENS - Infrared commands that control the M40 are output from LEDs hid-
den behind this lens. The lens should always be pointed directly at the IR
Sensor on the M40 Front Panel (Item 14, Page 6) when pressing buttons on
the remote for armchair control. The remote can control the M40 up to 40
feet away.
41. ON - With the M40 in Standby, (ON/Standby button backlight red), press
this button to turn the M40 ON (ON/Standby button backlight blue).
42. SOURCE SELECT BUTTONS - In Standby or with the M40 power ON, press
one of these to select a desired source. The Front Panel Display will indicate
the selected source.
43. NUMERIC BUTTONS - With AM or FM Tuner selected, press these but-
tons to select programmed tuner preset channels. Channels can be tuned
directly by first selecting a Band (AM/FM) then pressing the Direct button
followed by the channel frequency (94.7, 95.5, etc).
44. DIRECT - With AM or FM Tuner selected, press this button, followed by the
appropriate numeric buttons to enter a channel frequency. Direct In will
scroll across the Front Panel Display followed by the frequency numbers as
they are pressed.
45. DIMMER - Press this button to control of the brightness of the Front Panel
Display. When the M40 is turned ON, the Front Panel Display will illuminate
to full brightness. One press will dim the display to about half brightness, a
second press will turn the display OFF. A third press will restore full bright-
ness to the display.
46. MEMORY - With an AM or FM channel tuned, press this button to store it
as a Preset Channel. PRESET CH will appear on the Front Panel Display and
MEMO will flash slowly until a Preset Number is entered. Press 1-30 to store Preset. (The M40 can store up to 30 Presets total,
AM and FM). Storing a channel on an already programmed Preset will replace the existing Preset.
47. AUTO PRESET - With the FM Band selected, press this button automatically program the Preset Channels with the first 30 tun-
able FM channels found. The M40 can store up to 30 Presets. If fewer than 30 FM channels are found the M40 will cycle the FM
Band a second time to try to find more channels. The process will stop automatically after the second cycle.
48. CURSOR ARRAY/OK - With either the AM or FM selected, press the UP/DOWN buttons to tune the programmed Preset Chan-
nels. Press the LEFT/RIGHT buttons to increase/decrease the channel frequency by one increment. The OK button has no func-
tion.
49. FM MODE - With the FM Tuner selected, press of this button to switch the FM Tuner between stereo and mono modes. Typi-
cally, FM Mode should be left in the stereo mode. The mono setting can be useful for cleaning up background noise when
tuned to weak stereo channels.
50.
PRESET - With either the AM or FM Tuner selected, a press of this button will select the next previous programmed Tuner
Preset. That is, if currently on Preset 4, a press of the
M40 will return to the highest number programmed Preset. The selected Preset Number is indicated on the Front Panel Dis-
play to the right of the tuned frequency.
PRESET
- With either the AM or FM Tuner selected, a press of this button will select the next programmed Tuner Preset.
That is, if currently on Preset 4, a press of the Preset
grammed Preset, the M40 will return to Preset 1. The selected Preset Number is indicated on the Front Panel Display to the
right of the tuned frequency.
Preset button will select Preset 3. If Preset 1 is currently selected, the
button will select Preset 5. After selecting the highest number pro-
12
40
61
41
42
43
44
45
46
47
48
49
50
Diagram 3 M40 Remote Control Features
60
59
58
57
56
55
54
53
52
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents