Table of Contents
Advertisement
Dimmer
Press the Dimmer button on the M40 front Panel or M40
Remote to control of the brightness of the Front Panel Display.
When the M40 is turned ON, the Front Panel Display will illumi-
nate to full brightness. One press will dim the display to about
half brightness, a second press will turn the display OFF. A third
press will restore full brightness to the display.
Dimming the Front Panel Display may be desirable when
watching movies or other video content in a darkened room,
to reduce glare from the screen or if the illuminated display is
distracting.
Sleep Timer
With the M40 ON and with any source selected, press the Sleep
button on the M40 Front Panel or M40 Remote to turn on the
M40 Sleep Timer. Sleep Timer durations from 90-10 minutes in
10 minute increments can be set.
1. Press the Sleep button. The Sleep Timer Setup will appear
in the Front Panel Display as shown in Diagram 32. Repeat-
edly press the Sleep button until the desired sleep timeout
is set. When set, a red clock icon will appear in the Front
Panel Display and the display will dim to half brightness.
2. To check remaining time to OFF, press the Sleep button
ONCE. The remaining time to OFF will appear in the Front
Panel Display and then return to the dimmed, normal
display. TWO presses will cancel the Sleep Timeout.
Note: With a Sleep Timeout set, the display can be turned
OFF with the Remote or Front Panel Dimmer buttons, but
cannot be set to full brightness.
OPERATING THE M40
SP. A B
SP. A
Diagram 31 Dimming the Front Panel Display
SP. A
Diagram 32 Sleep Timer
29
M40 Front Panel
M40 Remote
M40 Front Panel
M40 Remote
Hide quick links:
Advertisement
Table of Contents
