Printing on transparent film
z
Before printing, check that white toner has been mounted to the device, and that white toner has been
selected using the printer drivers.
Memo
z For how to check the Spot Color toner selected using the printer drivers, see
Transparent films that can
be used
Use transparent film that satisfies the following
conditions.
z Transparent film used in e-photo printers or
dry PPC.
z Film that is heat-resistant to 230ºC.
z paper of width 210mm min.
z Thoroughly test the print quality and paper
traction beforehand, and check that there are
no impediments before use.
Note
z Do not use shrink film for soft packaging printing.
z Light film may have poor absorption, multiple feeding, and
paper jams.
"Checking the printer drivers"
Setting transparent film in
the device
1
Set the transparent film in the multi-
purpose tray.
2
Press the [Fn] key on the control panel.
The values input screen will be
displayed.
3
Press [9], [0], and press the [OK]
button.
4
Select the paper size, and press the
[OK] button.
5
Check that
the selected paper size, and press the
[BACK] button.
- 27 -
Printing on transparent film
(P.9).
is shown to the left of