Programming Tv/Vcr Combo Control - COX universal remote control User Manual

Cox Manual

PROGRAMMING TV/VCR COMBO CONTROL

If you own a TV/VCR Combo, perform the following
instructions to control this device:
1.
2.
3.
4.
11/27/01
AUX
AUX Device ____________________
VCR
TV
CABLE
Turn on your TV/VCR Combo and insert a
video cassette.
On the remote control, press VCR once.
Press and hold SETUP until the VCR key
blinks twice, then release SETUP.
Use the Setup Codes For TV/VCR Combos (on
page 17) to locate the brand name and then
enter the first four-digit code for your TV/VCR
Combo. If you perform this procedure correctly,
the VCR key will blink twice.
NOTE: If the VCR key did not blink twice after enter-
ing the code's last digit, then repeat steps 2 through 3
and try entering the same code again.
Aim the remote control at your TV/VCR
Combo and press POWER once. The device
should turn off. If it does not respond, repeat
steps 2-3, trying each code listed for your brand
until you find one that works. If it still does not
work, try searching for the code (see Searching
For Your Code on page 20).
7:14 PM Page 9
9
continued on next page...