Using The Master Power Key - COX universal remote control User Manual

Cox Manual

USING THE MASTER POWER KEY

The Cox Universal Remote Control is equipped with a
unique feature that allows you to sequentially turn on or
off all of your home entertainment devices with a single
key press as follows:
1.
2.
11/27/01
Point the remote control at the devices.
Press and hold MASTER POWER for 3 seconds
to sequentially turn on or off all home enter-
tainment devices.
Depending on what mode is currently selected,
the remote control will send IR commands to
the devices in the following order:
Start Mode
AUX
VCR Auxiliary, Cable, TV
TV
VCR,Auxiliary, Cable
CABLE
For example, if TV is selected, pressing and
holding MASTER POWER for 3 seconds will
turn off the VCR, an auxiliary device, and the
Cable converter.
NOTE: The remote control always defaults to
the CABLE mode after all devices are turned off.
Therefore, the initial power-on sequence will always
be TV, VCR, and an auxiliary device, if no other
device key is pressed first.
7:14 PM
Device On/Off
Cable, TV,VCR
TV,VCR,Auxiliary
24
Page 24
End Mode
CABLE
CABLE
CABLE
CABLE