Additional Information - COX universal remote control User Manual

Cox Manual
TROUBLESHOOTING (continued)
PROBLEM:
SOLUTION: Due to RCA design (1983-1987), only the original
PROBLEM:
SOLUTION: If original remote control required pressing
PROBLEM:
SOLUTION: Try the "Search Method" again after clearing out
PROBLEM:
SOLUTION: For power on, these products require program-

ADDITIONAL INFORMATION

This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Cox Universal Remote Control.
Copyright 2001 by Universal Electronics Inc. No part of
this publication may be reproduced, transmitted, tran-
scribed, stored in any retrieval system, or translated to any
language, in any form or by any means, electronic,
mechanical, magnetic, optical, manual, or otherwise, with-
out prior written permission of Universal Electronics Inc.
M7810
11/27/01
CH+ , CH – , and LAST do not work for your
RCA TV.
remote control will operate these functions.
Changing channels does not work properly.
ENTER to change channels, press ENTER on the
remote control after entering a channel number.
Tried "Search Method" and still could not find a
working code.
the device key as follows: Press and hold SETUP
until mode key blinks twice, then release. Next
enter 9 - 9 - 2. Then press and release the mode
key to be cleared twice.
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
ming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp,
use TV code 0093 and VCR code 0048.
7:14 PM Page 28
28
11/01