Searching For Your Code - COX universal remote control User Manual

Cox Manual

SEARCHING FOR YOUR CODE

If your TV,VCR, Cable Converter or Auxiliary device does
not respond to the Cox Universal Remote Control after
trying all of the codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1.
2.
3.
4.
5.
6.
11/27/01
Turn on your TV.
On the remote control, press TV once.
Then press and hold SETUP until the
TV key blinks twice, then release SETUP.
Enter 9 - 9 - 1. The TV key will blink twice.
Aim the remote control at the the TV and slowly
alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE: In the search mode, the remote control will
send IR codes from its library to the selected
device, starting with the most popular code first.
Press SETUP once to lock in the code.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (i.e., AUX, VCR, or CABLE) for
the (Auxiliary, VCR, or Cable) device you are
searching for.
7:14 PM Page 20
20