Maintenance; Warranty - Wel-Bilt 24288 User Manual

• Assemble as shown in Fig. 5. The nut should be tightened to a recommended 55 in/pds of torque.
Note the orientation of the flanged washers whereby the large diameter of washer should bear
against the wheel. Under no condition should the washers be reversed.
:
Caution The grinding wheels must always be checked for cracks of imperfections. This is done
with the "ring test." Tap the wheel gently near the outer rim with the handle of a screwdriver; you
should hear a clear bell-like ringing. If a dull thud occurs do not use the wheel! This means the
wheel has been damaged and will, most likely, come apart during normal operations.

MAINTENANCE

WARNING! Make sure this tool is disconnected from its power source before attempting any
maintenance, cleaning, or inspection.
• Maintain your tools. It is recommended that the general condition of any tool be examined
before it is used. Keep your tools in good repair by adopting a program of conscientious repair and
maintenance in accordance with the recommended procedures found in this manual. If any abnormal
vibrations or noise occurs, turn the tool off immediately and have the problem corrected before
further use. Have necessary repairs made by qualified service personnel.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and
grease.
• Cleaning. Use only soap and a damp cloth to clean your tools. Many household cleaners are
harmful to plastics and other insulation. Never let liquid get inside a tool.

WARRANTY

One-year limited warranty. For warranty questions, call 1-800-222-5381
Page of 13 9