HP e3000 User Manual page 36

Fibre channel mass storage adapters service and user manual

Hide thumbs Also See for e3000:

Table of Contents

Troubleshooting

Diagnostic Flowcharts

B. FC adapter displayed? FCSCAN shows FC adapters configured in the system. If the adapter is not

displayed, go to C. If it is displayed, continue with G.

C. Run IOCONFIG to verify if the required FC adapter is configured in the system.

D. Is FC adapter configured? If not configured, go to E. If configured but FCSCAN still is not able to

display it, go to F (Call HP Support Representative).

E. Configure Adapter. Using IOCONFIG, configure the FC adapter in your system.

F. Call HP. Contact the HP Support Representative and communicate the problem.

G. Device Displayed? If devices are not displayed, go to number 4 on flowchart 3.

Chapter 4

Table of Contents