Laser Safety Statements; Certification And Classification Information; Figure B-2 Class 1 Laser Label - HP e3000 User Manual

Fibre channel mass storage adapters service and user manual

Hide thumbs Also See for e3000:

Table of Contents

Regulatory Statements

Laser Safety Statements

This product contains a laser internal to the Optical Link Card/Optical Link Module (OLC/OLM) for

connection to the Fibre communications port.

In the USA, all models of the OLC/OLM are certified as Class 1 laser product and conform to the

requirements contained in the Department of Health and Human Services (DHHS) Regulation 21 CFR

sub-chapter J. The certification is indicated by a label located on the plastic OLC/OLM housing.

Outside the USA, all models of the OLC/OLM are certified as Class 1 laser components that conform to the

requirements contained in the International Electrotechnical Commission (IEC) standard 825 (1994) and

Amendment 1 (1990) along with the CENELEC (European Committee for Electrotechnical Standardization)

European Normalization Standard EN 60825 (1992).

Certifications include one or more of the following: Recognized Component by Underwriters Laboratories,

Certified by the Canadian Standards Association, Certified by VDE (Germany) and/or Certified by Statens

Provningsanstalt (SP) in Sweden.

The following figure shows the Class 1 information label specified in IEC 825 and CENELEC HD 482 51.

Figure B-2

Class 1 Laser Label

Appendix B

Table of Contents