HP e3000 User Manual page 33

Product:
Product Qualifier:
Logger:
Device Type:
Device Qualifier:
---------------------------------------------------------------------------
I/O Log Event Information:
I/O Event Class - Software Triggered Event
I/O Transaction Number - 0x00000000
Length of Hardware Status Logged - 0 bytes
Length of Driver Information Logged - 144 bytes
Low Level I/O (LLIO) Status:
Subsystem field = 999; Proc. Num. = -1; Error Num. = 17
Severity Level: Information
Fibre Channel Driver received an ERQ Frozen interrupt from
the adapter.
Raw manager data:
0x0000: 00 00 00 06
0x0010: 43 54 44 49
0x0020: 32 47 53 55
0x0030: 00 00 00 0A
0x0040: 08 00 45 00
0x0050: 00 00 00 08
0x0060: FF FF FF FF
0x0070: D5 D2 1D 50
0x0080: D4 01 54 00
=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-
• Diagnose tool runs a loopback test on a Fibre Channel adapter. This test is destructive and should only be
run by qualified personnel.
Chapter 4
FC Interface
HP6795A_Tachyon_XL2
FC_DAM
Interface
FibreTL
0x11ff03e7
17 D3 7C 80
53 52 2E 43
42 4D 00 7A
02 1D 92 F0
00 00 00 0B
00 00 00 0A
00 10 83 FC
00 00 00 01
D4 01 54 00
HP Support Tools Manager (STM) under MPE/iX
00 00 00 00 00 00 00 01
43 57 53 49 4F 2E 54 4C
00 00 00 00 C0 21 00 08
00 91 DB 18 83 FC EB 04
FF FA 20 00 FF FA 20 00
00 00 14 51 07 00 FF FF
EB 04 08 00 D5 D2 3D 50
00 00 00 08 00 00 00 00
00 00 00 00 00 00 10 00
Troubleshooting
33