Ricoh C210SF - Aficio SP Color Laser Support Manual page 11

Installation Requirements
Environment
1. Temperature range: 50 - 90.5°F
2. Humidity range: 15 - 80%RH
3. Do not install the machine in an area that is exposed to direct sunlight.
4. Do not install the machine in a space with poor airflow.
5. Do not expose the machine to a sudden temperature change, which
include:
Direct cool air from an air conditioner
Direct heat from a heater
6. Do not install the machine in an area that can be exposed to corrosive
gas.
7. Install the machine at a location lower than 8200 ft.
8. Install the machine on a strong, level base.
9. Do not install the machine in an area that can be subjected to strong
vibrations.
Power Requirements
1. Input voltage level: 120 V, 60 Hz
2. Permissible voltage fluctuation: ±10 %
3. Do not put or place anything on the power cord
Transporting The Printer After Installation
1. You need two or more people to move the machine. The machine weighs
approximately 77lbs without optional units. Before you turn off the main
power, move the CIS to the shipping position with Maintenance function
06. Note: End users can perform maintenance function 06 by
themselves. Remember to inform them to use this function before they
move the machine.
2. Keep the machine level while you move it.
3. Put the machine on a flat area. Make sure that the whole part of the base
supports the weight of the machine.
4. Whenever possible, use the padding provided in the original package to
repack machine.
5. Remove the following units and components:
• Photoconductor unit
• Optional paper feed unit
• Paper
NOTE: Do not remove the waste toner bottle. If you remove it, waste toner may
fall from the waste toner path.
6. Protect the photoconductor unit surface with paper or cloth.
7. Clean the units accessible and components in the printer.
8. Secure the paper tray and all exterior covers with appropriate tape.
Version 1.3
Product Support Guide G157
11