Autorepeat Recording - Security Labs SL 700 User Manual

3 Press the REC button on VCR No.1.
• During series recording,
• Recording will start in series recording mode.
autorepeat recording or
4 Set the security lock on VCR No.1.
timer recording are not
possible.
• When the end of the tape on VCR No.1 is reached, the
• If in the REC MODE SET
output at the SERIES OUT terminal will switch signal.
menu, "Series Rec Set" is
This will start recording on VCR No.2, the tape will stop
set to "NO", series
and be ejected on VCR No.1.
recording will not be
possible.
21
Time Lapse Video Cassette Recorder

Autorepeat Recording

Autorepeat Recording
The same tape can be recorded over many times.
1 Press the Menu, SHIFT
sequence to display the REC MODE SET menu.
• If during autorepeat 2 Press the SHIFT
recording there is an
(
alarm trigger, " " is
displayed on the display
3 Press the SHIFT
panel and alarm
autorepeat recording mode.
recording will take place.
Autorepeat recording will
NO . . . . . . Autorepeat recording doesn't take place.
continue after alarm
YES . . . . . Autorepeat recording takes place.
recording has completed
its programmed duration.
4 Press the Menu button two times, the normal screen
is displayed.
• The setting procedure is now complete.
5 Press the REC button.
• Recording will start. When the tape's end is reached,
the VCR will rewind it to the beginning regardless of
the counter memory, and recording will resume.
Time Lapse Video Cassette Recorder
, SHIFT button in
button to make the arrow mark
) point to Repeat Rec Set.
button to set the desired
"R.REC" will light on the display panel.
22