Autorepeat Recording - Security Labs SL810 User Manual

4 Set the security lock on VCR No.1.
• When the end of the tape on VCR No.1 is reached, the
output at the SERIES OUT terminal will switch signal.
This will start recording on VCR No.2, the tape will stop
and be ejected on VCR No.1.
22
960-Hour Time Lapse Video Cassette Recorder

Autorepeat Recording

Autorepeat Recording
The same tape can be recorded over many times. Please
note that if you activate this feature you will lose the
entire previous recording.
1 Press the Menu, SHIFT
sequence to display the REC MODE SET menu.
• If during autorepeat
recording there is an
alarm trigger, " " is
2 Press the SHIFT
displayed on the display
panel and alarm (
recording will take place.
3 Press the SHIFT
Autorepeat recording will
continue after alarm
autorepeat recording mode.
recording has completed
NO . . . . . . Autorepeat recording doesn't take place.
its programmed duration.
YES . . . . . Autorepeat recording takes place.
4 Press the Menu button two times, the normal screen
is displayed.
• The setting procedure is now complete.
5 Press the REC button.
• Recording will start. When the tape's end is reached,
the VCR will rewind it to the beginning regardless of
the counter memory, and recording will resume.
960-Hour Time Lapse Video Cassette Recorder
, SHIFT button in
button to make the arrow mark
) point to Repeat Rec Set.
button to set the desired
"R.REC" will light on the display panel.
23