Table of Contents
Advertisement
Normal Playback
Normal Playback
1
Turn on the power to the TV monitor.
2
Load the video cassette tape.
3
Press the REC/PLAY SPEED
• A slow motion effect or
select the playback speed.
accelerated playback
effect can be achieved by
• The selected playback speed is displayed on the display panel.
using a slower or faster
• A tape recorded with SP heads can be played in 2 / 24 /
playback speed than the
36 / 48 / 72 / 96 / 120 / 168 / 240 / 360 / 480 / 720 /
speed used for recording.
960 Hour Speed.
• A tape recorded with EP heads can be played in 6 / 18 /
36 / 48 / 72 / 96 / 120 / 168 / 240 / 360 / 480 / 720 /
960 Hour Speed.
4
Press the PLAY button.
• Playback starts.
• If necessary, adjust the tracking to eliminate the noise
from the picture.
5
To stop playback, press the STOP button.
• To advanced or rewind the tape, press the FF/CUE or
REW/REVIEW button.
Tracking Control
If there is noise in the image during playback,
1
While looking at the playback picture, press and
hold the TRACKING + button to minimize the noise.
2
If it cannot be minimized, press the TRACKING -
button.
3
Press the PLAY button in the playback mode.
Audio Playback
Audio playback is only possible in 2-hour, 6-hour and
• Noise will appear in the
18-hour modes.
image when audio
The playback speed has to be the same as the recording
playback is used in 18-
hour mode.
speed, for normal playback of the audio.
For a tape recorded in 2-hour, 6-hour, and 18-hour
modes, to playback the audio, press the AUDIO ON
button after pressing the PLAY button. "A" will be
displayed to the left of the playback speed on the display
panel. Press the AUDIO ON button again to remove "A".
24
(or
) button to
960-Hour Time Lapse Video Cassette Recorder
Special Playback
Picture Search
1
Press the FF/CUE (or REW/REVIEW) button, during
normal playback.
• During picture search,
noise (horizontal bars) will
• The image can be seen while the tape is advanced (or
appear in the picture.
rewound) at high speed.
• The sound is muted.
2
To return to normal playback, press the PLAY button.
Still Image
1
Press the PAUSE/STILL button, during normal
• If still mode continues for
playback.
5 minutes or more, the
VCR will go into stop
• A still image can be viewed.
mode to avoid damaging
the tape.
2
To return to normal playback, press the PLAY button.
• If the image is unstable
• With each press of the PAUSE/STILL button, the still
(rolling vertically), adjust
image is advanced one image (frame).
the tracking control to
correct.
Vertical Lock Control
During still image mode,
1
Press the TRACKING + button to reduce the vertical
rolling of the image.
2
If it cannot be corrected, press the TRACKING - button.
Slow
1
With each press of the FF button, during still image
mode, the slow speed will change as indicated below.
1/15times
direction)
2
With each press of the REW button, during still
image mode, the slow speed will change as
indicated below. 1/15times
1/5times (forward direction)
3
To return to normal playback, press the PLAY button.
Recording Check
During recording, press the REC CHECK button.
• The tape will be rewound for about 5 seconds and slow
• During recording check
operations, recording is
play mode will be performed. The VCR will then return
suspended momentarily.
to the previous recording mode.
960-Hour Time Lapse Video Cassette Recorder
1/20times
1/30times (forward
1/10times
25
Advertisement
Table of Contents
