Security Labs SL810 User Manual page 12

9 Press the SET - (or +) button to set the recording
stop minutes(eg : 00), then press the SHIFT
button.
• If the set stop time is
earlier than or the same
10 Press the SET - (or +) button to select the recording
time as the set start time,
speed(eg : 24), then press the SHIFT
the VCR will consider the
stop time to be the
• The cursor is moved to the N/Y position.
following day.
11 Press the SET - (or +) button to select "Y".
Y . . . . . recording will take place
N . . . . . recording will not take place
Programmed timer recording Example 1
• Repeat steps 4 to 13 to program timer recordings for
other days of the week.
• To set two or more timer recordings the same day of
the week, press the SHIFT
located in the day of the week for the second recording,
then press the SET - (or +) button, to set the desired
day of the week. With each press of the SET - ( or +)
button, the day will change as indicated below.
SET - :
14 Press the MENU button three times, the normal
screen is displayed.
15 Press the POWER/TIMER button.
• To modify, cancel timer
• The timer recording indicator " " will light on the
recording, press the
POWER/TIMER button to
display panel. The VCR is now in timer recording
cancel the timer recording
stand-by mode.
mode.
16
button.
button, until the cursor is
direction , SET + : direction
960-Hour Time Lapse Video Cassette Recorder
Example 2 : To record on everyday from 10 : 00 to
18 : 00, in 24-hour mode (recording speed)
1 Repeat steps 1 to 3.
2 Press the SHIFT
"DLY". The MENU below is displayed.
3 Repeat steps 5 to 15.
Changing a Program Timer Recording
1 Press the MENU, SHIFT
buttons in sequence to display the TIMER PROGRAM
SET(1) menu.
2 Press the SHIFT
is located in the setting to correct.
3 Press the SET - (or +) button, to correct the setting.
• Press the MENU button three times until the normal
screen is displayed.
4 Press the POWER/TIMER button.
960-Hour Time Lapse Video Cassette Recorder
button, until the cursor is on
Programmed timer recording Example 2
, SHIFT , SHIFT
(or ) button, until the cursor
17