Daewoo C-ED1243NPX Instruction Manual page 26

* RINSE+SPIN(D-ED1243NPX)
Put the laundry into the Drum and put softerner into the detergent case.
1 Then close the Door.
• Softener should be below 'MAX' level.
Press the Power button.
2
• The LED shows only '- --' signal.
Select the program you want using the program selection dial.
3 • If you press 'RINSE+SPIN' button without selecting program, the 'NORMAL' program
is selected as default program.
Press the 'RINSE+SPIN' button.
• '1' time rinse and '800' rpm spin speed and 'Cold' water temperature are selected
automatically.
4
• '500' rpm spin speed is selected in 'WOOL' program.
• If you want to change the Rinse time(s) and Spin condition, press each
corresponding button.
Press the 'Start/Pause' button.
5
• The washer will be operated with locking Door.
Note
• The water temperature selecting is impossible during this process.
• You can add the washing course during this process by pressing 'WASH' button.
26