Fonts - Epson Stylus COLOR 600 User Manual

4. Press the
character table and the next instructions in the language you selected.
The printed instructions list all of the fonts and character tables you
can select and show you how the control panel lights appear for each
selection. Use the instruction sheets to change the settings from the
control panel.
5. After making your changes, exit the default-setting mode by turning off
the printer.
Note:
You may exit the default-setting mode any time by turning off the printer.
Any changes you have made remain in effect until you change them again.
If you want to check the current default font and character table, enter the
default-setting mode again and print the current settings. The current
settings are indicated with arrows.

Fonts

Your printer has eight built-in character fonts including two EPSON fonts:
EPSON Roman T and EPSON Sans Serif H. (Roman T is similar to the
Times font; Sans Serif H is similar to Helvetica. )
The table below shows the available fonts.

Fonts

EPSON Courier
EPSON Roman T
EPSON Sans Serif H
EPSON Roman
EPSON Sans Serif
EPSON Prestige
EPSON Script
Draft
A-4
Using the Printer with DOS
-
load/eject button to print the current default font and
Sample