Epson Stylus COLOR 600 User Manual page 154

Color ink jet printer
Hide thumbs Also See for Stylus COLOR 600:
Table of Contents

Advertisement

5. Lift the cartridge out of the printer and dispose of it properly.
Do not take the used cartridge apart or try to refill it.
w
6. Remove the ink cartridge from its protective bag. Next,
remove only the yellow tape seal from the cartridge as
shown below.
c
7. Lower the ink cartridge into the cartridge holder with
the label on the cartridge face up and the arrow on the
cartridge pointing to the rear of the printer.
8-32
Troubleshooting
Warning:
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them
immediately with water.
black S020093
Caution:
You must remove the yellow tape seal from the
cartridge. Leaving the tape on when you install the
cartridge will permanently damage it.
Do not remove the tape seal from the bottom of the
cartridge; otherwise, ink will leak.
color S020089

Advertisement

Table of Contents
loading

Table of Contents