Epson Stylus COLOR 600 User Manual page 138

Paper does not fully eject.
Cause
The paper is too long.
Paper feed or paper jam problems occur frequently.
Cause
Sheets of paper are stuck
together.
The paper is too thin or
rough.
Too many sheets are loaded
in the sheet feeder.
The printable side of the
paper is not correctly loaded.
8-16
Troubleshooting
What to do
-
Press the load/eject button to eject
the paper. Use paper that meets the
paper requirements for this printer.
See "Paper" in Appendix C.
What to do
Fan the stack of paper and align the
edges before loading.
Make sure the paper meets the paper
requirements for this printer. See
"Paper" in Appendix C.
Check the paper package and
Chapter 6, "Printing on Special Paper",
for the amount of paper you can load
at one time in the sheet feeder .
Try turning the stack of paper over in
the sheet feeder. Most packages of
paper indicate the printable side with
an arrow on the end of the package.
Make sure the printable side is loaded
face up.