Clock; Childproof Lock; Changing The Basic Settings - Siemens HB13AB.23B Instruction Manual

Changing the end time
Use the @ or A button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the A button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the timer,
V x
clock, press the button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
If the type of heating and temperature or grill setting have been
set, the childproof lock interrupts the heating.
Activating the childproof lock
No cooking time or end time should have been set.

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
c1 Clock display
c2 Signal duration upon
completion of a
cooking time or
timer period
c3 Waiting time until a
setting is applied
* Factory setting
No other time-setting option should have been set.
10
button twice.
0
N arrow.
cooking time, end time or
y
arrow is next
N
Selection 1 Selection 2 Selection 3
always* only with -
the but-
0
ton
approx. approx. approx.
10 second 2 minutes* 5 minutes
s
approx. approx. approx.
2 seconds 5 seconds* 10 second
s

Clock

After the appliance is connected or following a power cut,
the symbol and three zeros are lit in the display. Set the
0
clock.
Press the button.
0
1.
The time 12:00 is shown in the display.
Use the or
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the button four times.
0
1.
The time symbols light up in the display and the
next to .
0
0
Use the @ or
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Press and hold the
The symbol appears in the display. The childproof lock is
@
activated.
Deactivating the childproof lock
Press and hold the
The symbol goes out in the display. The childproof lock is
@
deactivated.
Press and hold the
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the or
@
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the @ or
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
button to set the clock.
A
A button to change the clock.
button for approx. four seconds.
@
button for approx. four seconds.
@
0 button for approx. 4 seconds.
button to change the basic setting.
A
0 button.
button and change the setting
0
A button.
button for approx. 4 seconds.
0
arrow is
N