Surround Control Adjustment - Kenwood KVT-847DVD Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KVT-847DVD:
Table of Contents

Advertisement

Before Use

Surround Control Adjustment

You can adjust the sound field.
1
Display the Surround Control screen
Adjust
Surround Control Adjust screen
If the sound field of "Dolby PLII Music" has
been set:
PL Adjust
1
Dimention Control
2
Center Width Control
3
4
Panorama Mode
1
1 Adjusts the volume.
2 Sets the surround position by adjusting the
front and rear volume balance.
3 Sets the vocal image position by adjusting the
right and left vocal volume level.
4 Turns the Panorama mode On or Off.
5 Enters your setup and returns to the Surround
Control screen.
If the sound field of "SRS CS II " has been set:
CS
Adjust
Mix to Rear(Front)
6
Mix to Rear(Center)
7
6 Sets the surround position by adjusting the
front and rear volume balance.
7 Adjusts the center audio mix to rear volume.
2
Neutral
3
5
Off
5
Return
1
6
3
7
Return
• You cannot use the <Surround Control Adjustment>
during playback of Multi channel source, "dts", and
"Dolby Digital".
• You cannot use the <Surround Control Adjustment>
when the sound field of "Dolby PLII Movie", or "Dolby
PLII Matrix" has been set.
2
Adjust the sound field
3
Exit the Surround Control adjustment
1
Return
1
Sound Effects Menu
79
|
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-837dvdKvt-867dvd

Table of Contents