Appendix; Technical Data; Guarantee - Philips Faxjet 335 User Manual

9 Appendix

Technical Data

Dimensions (L¦×¦H¦×¦W) ...................372¦×¦293¦×¦198¦mm
Dimensions
Weight ...................................................................3,5¦kg
Weight
Power Supply ......................... 220¦–¦240¦V¦~ / 50¦–¦60¦Hz
Power Supply
Power Consumption
Power Consumption
Stand-by mode ..................................................<¦5¦W
Stand-by mode
Transmission ................................................... <¦25¦W
Transmission
Recommended Ambient Temperature ...............5¦–¦35¦ºC
Recommended Ambient Temperature
Relative humidity ................ 20¦–¦80¦% (non-condensing)
Relative humidity
Standards
Safety........................................................... EN¦60950-1
Safety EN 60950-1
Emissions ........................................... EN¦55022 Class B
Emissions EN 55022 Klasse B
Immunity to electrical noise EN 55024 Immunity to electrical noise ............................EN¦55024
Scanner
Scan width.......................................................... 206¦mm Scan width
Vertical resolution .................... Standard: 3,85 lines/mm
Vertical resolution Standard
Vertical resolution Fine ..................................................... Fine: 7,7 lines/mm
Printer
Breadth Breadth............................................................... 204¦mm
Resolution .................................................. 600¦x¦600¦dpi
Resolution
Speed..............................................up to 3 pages/minute Speed
Memory
Telephone book...................................... up to 60 entries
Telephone book
Voice messages...................................... up to 15 minutes
Voice messages
Fax messages........... up to 100 pages (standard test letter)
Fax messages
SMS messages............................. up to 30 SMS messages
SMS messages
Telephone
Type of connection................................... PSTN · PABX
Type of connection
Dialling mode.Tone / pulse dialling (country dependent)
Dialling mode
Paper
Capacity ..........................................................100 sheets
Capacity
Size.................................................... A4 · 210¦×¦297¦mm
Size
Thickness ................................................ 0,07¦–¦0,11¦mm
Thickness
Weight Weight .........................................................60¦–¦90¦g/m²
Document Feeder
Capacity Capacity ............................................................20 sheets
Breadth......................................................148¦–¦216¦mm
Breadth
Length Length .......................................................100¦–¦600¦mm
Thickness ................................................ 0,06¦–¦0,15¦mm
Thickness
Fax
Type .................................................................. Group 3
Type Group 3
Compatibility ...............................................ITU-T¦T.30
Compatibility
Data compression ...............................MH · MR · MMR
Data compression
Modulation .........................V.17 · V.27 · V.27ter · V.29 Modulation
Transmission speed......................................... 14.400¦bps
Transmission speed
Subject to Change
Technical specifications subject to change with-
out notice.

Guarantee

(UK Terms and Conditions)
At the beginning of April 2002, SAGEM SA bought the
PHILIPS fax business unit. SAGEM SA is now the Euro-
pean Number 1 in fax and offers a complete range of fax
terminals with Internet access and SMS function, multi-
functional terminals and servers covering the needs of all
its customers—from home-users to multinational organi-
sations.
In order to apply the guarantee, you should contact your
dealer. Proof of purchase will be required. Should mal-
functioning arise, the dealer will advise you what to do.
If you bought your equipment from SAGEM directly, the
following shall apply:
A SAGEM undertakes to remedy by repair, free of charge
for labour and replacement parts, any defects in the equip-
ment during a period of twelve (12) months from the date
of original delivery of the Equipment, where those defects
are a result of faulty workmanship. During this twelve
month guarantee period, the defective equipment will be
repaired free of charge; the customer must however first
contact the SAGEM After Sales Department, the phone
number of which can be found on the delivery slip or in
the user manual. Unless the customer has concluded with
SAGEM a maintenance contract in respect of the equip-
ment which specifically provides for repairs to be carried
out at the customer's premises, the repairs will not be car-
ried out on the equipment at the customer's premises. The
following sentence applies to purchases of equipment for
the customer's trade, business or profession. Except as oth-
erwise expressly provided in this Document and to the ex-
tent permitted by law, SAGEM makes no representations
or warranties, express or implied, statutory or otherwise,
and to such extent, all terms and conditions implied by law
are hereby excluded. This guarantee does not affect the
Customer's statutory rights.
B Exclusions From Guarantee
SAGEM shall have no liability under the guarantee in re-
spect of:
• damage, defects breakdown or malfunction due to:
- failure to properly follow the installation process and in-
structions for use; or
- an external cause to the equipment (including but not
limited to, lightening, fire, shock or water damage of any
nature); or
- modifications made without the written approval of
SAGEM SA; or
- a failure or neglect to maintain the equipment or inap-
propriate maintenance; or
- unsuitable operating conditions, particularly of tempera-
ture and humidity; or
- repair or maintenance of the equipment by persons not
authorised by SAGEM; or
• wear and tear from normal daily use of the equipment
and its accessories
• damage due to insufficient or bad packaging of equip-
ment when returned to SAGEM
33