External Monitor - Toshiba U840W User Manual

Problem
The "USB Wakeup
function" does not
work.
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Problem
No sound is heard
Annoying sound is
heard

External monitor

Please also refer to Chapter 3,
supplied with your monitor for further information.
User's Manual
Procedure
When Sleep and Charge function is enabled, the
"USB WakeUp" function does not work for ports
that support the Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function or change to
disable Sleep and Charge function.
Procedure
Adjust the volume.
To increase the volume click the volume up button,
and to decrease it click the volume down button.
Check the software volume settings.
Please check to see if Mute is turned to Off
Check to make sure the headphone connection is
secure.
Check within the Windows Device Manager
application to ensure the sound device is enabled
and that the device is properly working.
In this instance you may be experiencing feedback
from either the internal microphone or an external
microphone connected to the computer - please
refer to Sound System
Basics for further information.
Volume cannot be adjusted during Windows start
up or shut down.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Operating Basics, and to the documentation
in Chapter 3, Operating
6-12