Hw Setup - Toshiba U840W User Manual

At this point, the hotkeys do not work. They will function after you enter the
password.
2.
3.
If you enter the password incorrectly three times in a row, or if you don't
enter the password within 1 minute, the computer shuts off. In this case,
some features that can power on the computer automatically (Wake-up on
LAN, Task Scheduler, etc) may not work. You must turn the computer back
on to retry password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup utility to
configure your computer, and provides information on settings for various
functions.
After you changed the settings of HWSetup, a dialog box may appear to
prompt you that the changes will take effect after the computer is restarted.
Make sure to restart your computer immediately to apply these changes.
Accessing HW Setup
To run the HW Setup utility, click Start -> All Programs -> TOSHIBA ->
Tools & Utilities -> HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Setting, Keyboard, USB, LAN and SATA) to allow specific
functions of the computer to be configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK
Cancel
Apply
Some options shown in grey are possible to confirm their status.
User's Manual
Enter the Password.
Press ENTER.
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
4-10