Philips medication dispenser User Manual page 39

6. Turn on the dispenser.
• Slide the power switch up to the "On" position.
• The Philips Medication Dispenser will conduct a self-test. The display will show:
After a few seconds, the red LED will light up and "System OK, ready for setup" will be
announced and displayed .
7. Call the Support Center.
Helpful Hint: Use a cell phone to call the Support Center . This allows you to remain
on the line with the Support Specialist through the entire installation .
• Call the Support Center at 1-888-632-3261. Tell the Support Specialist that you are
ready to activate the service. You will need to provide the patient's name and the
serial number of the Philips Medication Dispenser . The serial number is listed on the
bottom of the label inside the door .
34
Power switch
Serial number
For assistance, call the Support Center at 1-888-632-3261 .