Setup - Philips medication dispenser User Manual

Setup

1. Select a location.
The Philips Medication Dispenser should be located:
• Near a phone jack and an electrical wall outlet that is not controlled by a
wall switch
• In an area of the home where you spend much of your time
• On a hard, flat surface
• Away from sources of noise (television, radio, air conditioner, etc.)
2. Unload the box.
• Remove the dispenser and supplies from the box. Save the box and packing
materials for future use as needed .
• Turn the key clockwise to open the door, and remove the gray foam block located
at the top of the cylinder .
• Close the door and turn the key counterclockwise to lock the door in place.
3. Plug in the phone cord.
• Plug one end of the cord into a phone jack on the wall. If you already have a phone
plugged into this jack, please temporarily disconnect this phone. You will reconnect
it in the next step .
• Plug the other end of the telephone cord into either of the phone jacks on the back
of the Philips Medication Dispenser .
32
For assistance, call the Support Center at 1-888-632-3261 .