Philips medication dispenser User Manual page 18

4. Load medication cups for the day/date displayed on the dispenser. Make sure
to load the cups upside down in the order that they are to be taken. In other
words, the 1st dose of the day is loaded first, the 2nd dose is loaded second, etc.
Medication is loaded on a day-by-day basis . After one day's worth of medication is
loaded, the cylinders will rotate before the next day's medication is loaded .
5. When you have loaded all the cups for that day, press the "OK" key to continue.
The display will show:
6. To continue loading medication, press the "OK" key. Repeat the steps above until
all medications are loaded.
• Always load a complete day's worth of medication.
• If you are loading more than 10 days' worth of medication, the cylinders will
contain medication cups loaded for a previous day . This is completely normal .
Load the new day's medication cups on top of those already in the cylinder .
7. To exit and stop loading medication, press the right or left arrow key until "Quit"
is blinking and then press the "OK" key.
NOTE: If you accidentally select "Continue" instead of "Quit, " simply press the
"Run" key to exit .
Preparing and Loading Medication
3 dose
rd
2 dose
nd
1 dose
st
"Continue" will be blinking .
13