Basic copying
13
Basic copy
1
Select
(copy) on the control panel.
2
Place a single document face down on the document glass (see "Loading
originals" on page 35).
If you want to customize the copy settings including Reduce/Enlarge,
3
Darkness, Contrast, Original Type, and more by using the control
panel buttons.
4
Enter the number of copies using the arrow or number keypad, if
necessary.
5
Press
(Start).
If you need to cancel the copying job during the operation, press
(Stop/Clear) and the copying will stop.
14
ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may differ.
1
Press ID Copy on the control panel.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
42
2. Basic Setup