Dell B1163 User Manual page 123

Wireless network setup
10 When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click Next.
11 The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Select No if you want to return to the beginning screen.
Then, click Next.
Click Next when the Confirm Printer Connection window appears.
12
Select the components to be installed. Click Next.
13
After selecting the components, you can also change the machine name,
14
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
15 After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 16.
16 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
17 Click Finish.
Ad hoc via USB cable in Windows
If you do not use an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
• Items to prepare
- Network-connected computer
- Software CD that was provided with your machine
- The machine installed with a wireless network interface
- USB cable
If any of the following conditions occur, you have to setup Wi-Fi installation
using a USB cable.
- OS of your computer is Windows Vista or earlier.
- Your PC does not support wireless network.
- Your PC can not connect to wireless network.
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer and the wireless network machine.
2. Using a Network-Connected Machine
123