Control Settings - GE EDW4000 Series Owner's Manual
Triton xl edw4000 series, triton xl ghda960 series, triton xl ghda980 series, triton xl gsd6100 series, triton xl gsd6200 series, triton xl gsd6300 series, triton xl gsd6500 series, triton xl gsd6600 series, triton xl gsd6700 series, triton xl gsd6800 ser
Hide thumbs
Also See for EDW4000 Series:
- Technical service manual (44 pages) ,
- Owner's manual (17 pages) ,
- Owner's manual (16 pages)
Table of Contents
Advertisement
About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance
may vary from your model.
Control Settings
Status Indicator Lights
1
The Status display tells you what's happening while the dishwasher is in operation and may
flash, indicating a malfunction (see page 6). The lights will come ON indicating the sequence
of operation the dishwasher is in.
SENSING Displayed while the ExtraClean
(on some models) The dishwasher will adjust the selected cycle to achieve optimal performance.
WASHING Displayed during prewash and main wash periods.
(on some models)
RINSING Displayed during rinse periods.
(on some models)
DRYING Displayed during HEATED DRY.
(on some models)
SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.
ExtraClean
2
The light above the selected pad will be ON to indicate which ExtraClean
selected.
ANTI-BACTERIA Heavy 10.0 gal., 93 min.
or SANI WASH Medium 8.6 gal., 90 min.
NORMAL WASH Heavy 9.9 gal., 74 min.
4
1
2
CLEAN Displayed when a wash cycle is complete. The light will remain ON until door is opened.
™
Sensor Selections
Light 7.2 gal., 90 min.
This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle
length will vary depending on the temperature of your inlet water.
NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is
interrupted during or after the main wash portion or if the incoming water temperature is so
low that adequate water heating cannot be achieved, the sanitizing conditions may not be met.
In these cases, the sanitized light will not illuminate at the end of the cycle.
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
POTS Heavy 11.4 gal., 95 min.
& PANS Medium 10.0 gal., 71 min.
Light 10.0 gal., 66 min.
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.
This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.
Medium 7.0 gal., 61 min.
Light 5.6 gal., 48 min.
This cycle is for medium/heavily soiled dishes and glassware.
5
4
3
™
Sensor is measuring the amount of soil and temperature of water.
™
Sensor Selection has been
Hide quick links:
Advertisement
Table of Contents
