Control Panel; Control Settings - GE GSC3500 Owner's Manual

About the dishwasher control panel
You can locate your model number on the left tub wall just inside the door. Throughout this manual,
features and appearance may vary from your model.

Control Settings

Cycles
CYCLES are selected using a combination of timer dial setting and pad selection. An indicator above the selected pad will be ON to
indicate which pad has been selected.
POTS & PANS
NORMAL WASH
LIGHT WASH
RINSE ONLY
PLATE WARMER
HOT START
Options
An indicator above the selected pad will be ON to indicate which pad has been selected.
RESET OPTION
HEATED DRY
Cycle Chart
Cycle
Hot Start Option
Pots & Pans
Normal Wash
Light Wash
Rinse Only
Plate Warmer
For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
NORMAL/ For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter
soil than normal.
For dishes with light soils. NOTE: Pad must be set to NORMAL WASH.
For rinsing partial loads that will be washed later. Do not use detergent.
DRYING For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
Preheats wash water to improve wash performance.
Shuts off the drying heat option. Dishes air dry naturally and energy is saved. Open the dishwasher door
to speed drying.
Turns the heater on for fast drying. This cycle will extend the time to your wash cycle by 30 minutes.
ON DO NOT use with RINSE ONLY cycle.
Water Usage (gal.)
2.5
7.0
5.7
4.5
2.2
0.0
Cycle Time (min.)
12
118
118
114
53
40
ge.com
5