Control Settings - GE GSD3200 Series Owner's Manual

Control Settings

Cycles
1
POTS & PANS For heavily soiled dishes or cookware with dried-on
HOT START Preheats wash water to the correct temperature.
NORMAL WASH For loads of everyday dishes, glasses and cookware
SHORT WASH For quickly washing loads of everyday dishes with
RINSE ONLY For rinsing partial loads that will be washed later.
PLATE WARMER For warming clean dishes and serving plates. This
Make sure the Dial is at the OFF position.
Latch the door.
Energy Options
2
HI TEMP Provides extra heat for best performance. It is used
WASH best with heavily-soiled dishes.
HEATED DRY ON/ Turns the drying heater on for fast drying. This
HEATED DRY cycle will extend the time to your wash cycle.
HEATED DRY OFF Shuts off the drying heat option. Dishes air dry
Start
3
Slowly turn the Dial to the START position. Don't turn it
past the START position, or you could accidentally miss a
rinse. There is a time delay between start-up and water
fill so you will not hear any wash action right away.
or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
with medium soils. NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
medium soils that have not dried on, such as loads
consisting mostly of glasses.
Do not use detergent.
cycle will take approximately 32 minutes.
naturally and energy is saved.
9