Table of Contents
Advertisement
How to Use Your VL600 USB Modem
To properly insert the VL600 USB Modem:
1. Flip the protective cap upward from the USB modem.
2. Hold the USB modem along the side edges and gently insert the USB modem into
your computer's Type A USB port. The VL600 should fit easily into the USB port. Do
not force the VL600 into the USB port as this may damage both the USB modem and
the USB port.
3. Wait until Windows completes the "Found New Hardware" task. The Hardware Icon
tray appears in the system tray.
Note: If you are experiencing trouble inserting the USB modem into you computer's USB port:
1. Verify that you are inserting the USB modem the proper way.
2. Verify that you are using a Type-A USB port
14
Advertisement
Table of Contents
