Download  Print this page

Flashing Display Lights - GE Profile PDW8400 Series Owner's Manual

Ge profile dishwasher
Hide thumbs


Table of Contents
PDW8100–PDW8800 Series
The CLEAN light is illuminated when the selected cycle and enhancements are complete. The light will stay ON until
the door is opened.
PDW9200–PDW9800 Series
The CLEAN light is illuminated and a double beep will sound when the selected cycle and enhancements are complete.
You may remove the dishes at any time. Note the high-efficiency fan will run quietly for 30 minutes to 4 hours (depending
on selected cycle) after the CLEAN light is illuminated to continue drying the dishes. This can be interrupted by opening
the door and pressing any keypad.
NOTE: To turn off the double beep indicator (or re-activate it if it was previously disengaged), press the HEATED DRY
pad 5 times within 3 seconds. A triple beep will sound to indicate the end-of-cycle beep option has been toggled.

Flashing display lights.

Status Indicator Lights
Recommended dishwasher products.
GE recommends the following products for use in
its dishwashers:
s Electrasol,
Dishwasher Detergents.
s Jet Dry
and prevent new film buildup on your dishes,
glasses, flatware, cookware and plastic.
s Cascade
inside your dishwasher that can come from some
tomato-based stains.
What It Means
Cycle has been interrupted by pressing the START/RESET pad. Light will
quit flashing after the dishwasher automatically drains out the water.
and Cascade Complete
and Cascade Rinse Aid
to remove spots
Plastic Booster
to remove red staining
s Cerama Bryte
Stainless Steel Appliance Cleaner
to clean the stainless steel panel of GE and
stainless exterior dishwashers.
s Jet Dry
Dishwasher Cleaner to help remove
some hard water mineral stains that can occur
in hard water conditions.


Table of Contents

  Related Manuals for GE Profile PDW8400 Series