LG LW6324 series Owner's Manual page 22

TCP/IP
IPv4 address status
> Automatically set with DHCP: Select this option when a
DHCP server is installed on the network to allow IP address
assignment. With this setting, the IP address is assigned
automatically.
- Notify to SMTP server, if IP address is changed: If you
select this option, the user get a notification mail telling
about changing of IP of the IP device.
Notes:
• You should register the SMTP server on the Event server
setting to set this function.
• If you select [Automatically set with DHCP], the camera
obtain IP address from DHCP server after IP address is set
"192.168.0.16".
22
> Statically set: Select this option when you set a fixed IP
address, with this setting, specify the IP address, Subnet
mask and default gateway manually.
- IPv4 address: Enter an IP address.
- Subnet mask: Enter a subnet mask address.
- Gateway: Enter the gateway address.
DNS server status
> Primary DNS server: Enter the Primary domain name server
that translates the hostnames into IP address.
> Secondary DNS server: Enter the Secondary DNS server
address that backups the Primary DNS.
IPv6 address status
> Enable: Click the check box if you want to use the IPv6
address.
> Mode
- Manual: Select this option when you set a fixed IP
address manually.
- Basic: Select this option to allow IPv6 address assignment
based on the Mac address. With this setting, the IP
address is assigned automatically.
- DHCPv6: Select this option when exist a DHCPv6 server
in network. If DHCPv6 server is not existed or temporary
disability, it requests assignment every 3 minutes.
> IPv6 address: You can enter the IP address when you select
the Manual mode. It alarms when you enter the invalid IP
address.
• Save: Click this button to confirm the settings.
Operation and settings